Tag Archives: branch point

INTRODUCTION TO ELECTRONICS: Thevenin Voltage and Resistance Determination

Now that a conceptual understanding of Thevenin’s theorem has been established, we are ready to determine the Thevenin voltage ( VTH ) and Thevenin resistance ( RTH ) for an open circuit: The equivalent voltage will represent a system in which the voltage source ( Vs ) has been replaced by a voltage that “Continue reading “INTRODUCTION TO ELECTRONICS: Thevenin Voltage and Resistance Determination“

INTRODUCTION TO ELECTRONICS: Series-Parallel Circuits

For the most part, the circuits we’ve encountered have been either series or parallel circuits with no deviance from either extreme. The only exception to this trend regarded circuits that had multiple voltage sources positioned within their multi-loop matrix. Adding to this complexity was the fact that these voltage sources could be oriented in anyContinue reading “INTRODUCTION TO ELECTRONICS: Series-Parallel Circuits“

INTRODUCTION TO ELECTRONICS: Parallel Circuits

We have previously seen how all of the current ( I ) within a series circuit will pass through each resistor ( R ) situated within it. The sum of the energy drops that a coulomb ( C ) of charge loses as it traverses a circuit is equal to the voltage ( V )Continue reading “INTRODUCTION TO ELECTRONICS: Parallel Circuits“

INTRODUCTION TO ELECTRONICS: Kirchhoff’s Laws ( Part 4 )

Prior to completion of the previous lecture’s circuit problem, some additional practice identifying nodes and branches within a multi-loop circuit will be helpful: We begin our journey at the 3 V source located at the far-left side of the diagram. As the current ( I ) moves upward and to the right, we encounter ourContinue reading “INTRODUCTION TO ELECTRONICS: Kirchhoff’s Laws ( Part 4 )“